west coast windows
* Storm *
Preparation
* VIDEOS *
Vinyl Windows
and Doors
Aluminum
Windows
and Doors
Hurricane Impact Windows
Storm Panels
and Screens
Low-E2 Energy
Efficient Glass
Installation
Questions
Recent Installations
Testimonials
Glossary
Contact Us
Home

Glossary

Tampa Window Replacement Specialists 813-631-0097

AAMA. American Architectural Manufacturers Association. A national trade association that establishes voluntary standards for the window, door, and skylight industry.

Absorptance. The ratio of radiant energy absorbed to total incident radiant energy in a glazing system.

Annealed glass. Standard sheet of plate glass.

ANSI. American National Standards Institute. Clearing house for all types of standards and specifications. Argon. An inert, nontoxic gas used in insulating windows to reduce heat transfer.

Awning. Window similar to a casement except the sash is hinged at the top and always swings out.

Balance. A mechanical device (normally spring loaded) used in single- and double-hung windows as a means of counterbalancing the weight of the sash during opening and closing.

Bay window. An arrangement of three or more individual window units, attached so as to project from the building at various angles. In a three-unit bay, the center section is normally fixed, with the end panels operable as single-hung or casement windows.

Bottom rail. The bottom horizontal member of a window sash.
Bow window. A rounded bay window that projects from the wall in an arc shape, commonly consisting of five sashes.

Btu (B.T.U.). An abbreviation for British Thermal Unit--the heat required to increase the temperature of one pound of water one degree Fahrenheit.

Casement. A window sash that swings open on side hinges; in-swinging are French in origin; out-swinging are from England.

Check rail. The bottom horizontal member of the upper sash and the top horizontal member of the lower sash which meet at the middle of a double-hung window.

Condensation. The deposit of water vapor from the air on any cold surface whose temperature is below the dew point, such as a cold window glass or frame that is exposed to humid indoor air.

Conduction. Heat transfer through a solid material by contact of one molecule to the next. Heat flows from a higher-temperature area to a lower-temperature one.

Desiccant. An extremely porous crystalline substance used to absorb moisture from within the sealed air space of an insulating glass unit.

Divided light. A window with a number of smaller panes of glass separated and held in place by muntins.

Double glazing. In general, two thicknesses of glass separated by an air space within an opening to improve insulation against heat transfer and/or sound transmission. In factory-made double glazing units, the air between the glass sheets is thoroughly dried and the space is sealed airtight, eliminating possible condensation and providing superior insulating properties.

Double-hung window. A window consisting of two sashes of glass operating in a rectangular frame, in which both the upper and lower halves can be slid up and down. A counterbalance mechanism usually holds the sash in place.

Double-strength glass. Sheet glass between 0.115" and 0.133" (3-3.38 mm) thick.

Extrusion. The process of producing vinyl or aluminum shapes by forcing heated material through an orifice in a die. Also, any item made by this process.

Eyebrow windows. Low, inward-opening windows with a bottom-hinged sash. These attic windows built into the top molding of the house are sometimes called "lie-on-your-stomach" or "slave" windows. Often found on Greek Revival and Italianate houses.

Fanlight. A half-circle window over a door or window, with radiating bars. Also called circle top transom.

Fixed light. A pane of glass installed directly into non-operating framing members; also, the opening or space for a pane of glass in a non-operating frame.

Fixed panel. An inoperable panel of a sliding glass door or slider window.

Fixed window. A window with no operating sashes.

Flashing. Sheet metal or other material applied to seal and protect the joints formed by different materials or surfaces.

Fogging. A deposit of contamination left on the inside surface of a sealed insulating glass unit due to extremes of temperatures or failed seals.

Frame. The fixed frame of a window which holds the sash or casement as well as hardware.

Gas fill. A gas other than air, usually argon or krypton, placed between window or skylight glazing panes to reduce the U-factor by suppressing conduction and convection.

Glazing bead. A molding or stop around the inside of a window frame to hold the glass in place.

Greenhouse window. A three-dimensional window that projects from the exterior wall and usually has glazing on all sides except the bottom, which serves as a shelf.

Heat gain. The transfer of heat from outside to inside by means of conduction, convection, and radiation through all surfaces of a house.

Heat loss. The transfer of heat from inside to outside by means of conduction, convection, and radiation through all surfaces of a house.

Hinged windows. Windows (casement, awning, and hopper) with an operating sash that has hinges on one side. See also Projected window.

Hopper. Window with sash hinged at the bottom.

Horizontal slider. A window with a movable panel that slides horizontally.

Infiltration. The movement of outdoor air into the interior of a building through cracks around windows and doors or in walls, roofs, and floors.

Infrared radiation. Invisible, electromagnetic radi-ation beyond red light on the spectrum, with wavelengths greater than 0.7 microns. Insulated shutters. Insulating panels that cover a window opening to reduce heat loss.

Insulating glass. Two or more pieces of glass spaced apart and
hermetically sealed to form a single glazed unit with one or more air spaces in between. Also called double glazing.

Jalousie. Window made up of horizontally-mounted louvered glass slats that abut each other tightly when closed and rotate outward when cranked open.

Jamb. A vertical member at the side of a window frame, or the horizontal member at the top of the window frame, as in head jamb.

Laminated glass. Two or more sheets of glass with an inner layer of transparent plastic to which the glass adheres if broken. Used for safety glazing and sound reduction.

Lift. Handle for raising the lower sash in a double-hung window. Also called sash lift.

Light. A window; a pane of glass within a window. Double-hung windows are designated by the number of lights in upper and lower sash, as in six-over-six. Also spelled informally lite.

Lintel. A horizontal member above a window or door opening that supports the structure above.

Long-wave infrared radiation. Invisible radiation, beyond red light on the electromagnetic spectrum (above 3.5 micro meters), emitted by warm surfaces such as a body at room temperature radiating to a cold window surface.

Low-emittance (low-E) coating. Microscopically thin, virtually invisible, metal or metallic oxide layers deposited on a window or skylight glazing surface primarily to reduce the U-factor by suppressing radiative heat flow. A typical type of low-E coating is transparent to the solar spectrum (visible light and short-wave infrared radiation) and reflective of
long-wave infrared radiation.

Meeting rail. The part of a sliding glass door, a sliding window, or a hung window where two panels meet and create a weather barrier. Metal-clad windows. Exterior wood parts covered with extruded aluminum or other metal, with a factory-applied finish to deter the elements.

Mullion. A major structural vertical or horizontal member between window units or sliding glass doors.

Muntin. A secondary framing member (horizontal, vertical, or diagonal) to hold the window panes in the sash. This term is often confused with mullion.

Muntin grilles. Wood, plastic, or metal grids designed for a single-light sash to give the appearance of muntins in a multilight sash, but removable for ease in cleaning the window.

Nailing fin. An integral extension of a window or patio door frame which generally laps over the conventional stud construction and through which nails are driven to secure the frame in place.

Obscure glass. Any textured glass (frosted, etched, fluted, ground, etc.) used for privacy, light diffusion, or decorative effects.

Operable window. Window that can be opened for ventilation.

Operator. Crank-operated device for opening and closing casement or jalousie windows.

Pane. One of the compartments of a door or window consisting of a single sheet of glass in a frame; also, a sheet of glass.

Panel. A major component of a sliding glass door, consisting of a light of glass in a frame installed within the main (or outer) frame of the door. A panel may be sliding or fixed.

Picture window. A large, fixed window framed so that it is usually, but not always, longer horizontally than vertically to provide a panoramic view.

Polyvinylchloride (PVC). An extruded or molded plastic material used for window framing and as a thermal barrier for aluminum windows.

R-value. A measure of the resistance of a glazing material or fenestration assembly to heat flow. It is the inverse of the U-factor (R = 1/U) and is expressed in units of hr-sq ft-°F/Btu. A high-R-value window has a greater resistance to heat flow and a higher insulating value than one with a low R-value.

Radiation. The transfer of heat in the form of electromagnetic waves from one separate surface to another. Energy from the sun reaches the earth by radiation, and a person's body can lose heat to a cold window or skylight surface in a similar way.

Rail. Horizontal member of a window sash. Reflectance. The ratio of reflected radiant energy to incident radiant energy.

Reflective glass. Window glass coated to reflect radiation striking the surface of the glass.

Retrofitting. Adding or replacing items on existing buildings. Typical retrofit products are replacement doors and windows, insulation, storm windows, caulking, weatherstripping, vents, landscaping.

Rough opening. The opening in a wall into which a door or window is to be installed.

Safety glass. A strengthened or reinforced glass that is less subject to breakage or splintering.

Sash. The portion of a window that includes the glass and the framing sections directly attached to the glass, not to be confused with the complete frame into which the sash sections are fitted.

Screen. Woven mesh of metal, plastic, or fiberglass stretched over a window opening to permit air to pass through, but not insects.

Shading coefficient (SC). A measure of the ability of a window or skylight to transmit solar heat, relative to that ability for 1/8-inch clear, double- strength, single glass. It is being phased out in favor of the solar heat gain coefficient, and is approximately equal to the SHGC multiplied by 1.15. It is expressed as a number without units between 0 and 1. The lower a window's solar heat gain coefficient or shading coefficient, the less solar heat it transmits, and the greater is its
shading ability.

Short-wave infrared radiation. Invisible radiation, just beyond red light on the electromagnetic spectrum (between 0.7 and 2.5 microns), emitted by hot surfaces and included in solar radiation.

Sill. The lowest horizontal member in a door, window, or sash frame.

Sill track. The track provided at the sill of a sliding glass door. Also, the sill member incorporating such a track.

Simulated divided lights. A window that has the appearance of a number of smaller panes of glass separated by muntins, but actually is a larger glazing unit with the muntins placed between or on the surfaces of the glass layers.

Single glazing. Single thickness of glass in a window or door.

Single-hung window. A window consisting of two sashes of glass, the top one stationary and the bottom movable. Single-strength glass. Glass with thickness between 0.085" and 0.100" (2.16-2.57 mm).

Sliding glass door. A door fitted with one or more panels that move horizontally on a track and/or in grooves. Moving action is usually of rolling type (rather than sliding type). Also called gliding door, rolling glass door, and patio sliding door.

Sliding window. A window fitted with one or more sashes opening by sliding horizontally or vertically in grooves provided by frame members. Vertical sliders may be single- or double-hung.
Solar control coatings. Thin film coatings on glass or plastic that absorb or reflect solar energy, thereby reducing solar gain.

Solar heat gain coefficient (SHGC). The fraction of solar radiation admitted through a window or skylight, both directly transmitted, and absorbed and subsequently released inward. The solar heat gain coefficient has replaced the shading coefficient as the standard indicator of a window's shading ability. It is expressed as a number between 0 and 1. The lower a window's solar heat gain coefficient, the less solar heat it
transmits, and the greater its shading ability. SHGC can be expressed in terms of the glass alone or can refer to the entire window assembly.

Solar radiation. The total radiant energy from the sun, including
ultraviolet and infrared wave lengths as well as visible light.
Solar spectrum. The intensity variation of sunlight across its spectral range.

Spectrally selective glazing. A coated or tinted glazing with optical properties that are transparent to some wavelengths of energy and reflective to others. Typical spectrally selective coatings are transparent to visible light and reflect short-wave and long-wave infrared radiation.

Tempered glass. Treated glass that is strengthened by reheating it to just below the melting point and then suddenly cooling it. When shattered, it breaks into small pieces. Approximately five times stronger than standard annealed glass; is required as safety glazing in patio doors, entrance doors, side lights, and other hazardous locations. It cannot be recut after tempering.

Thermal break. An element of low conductance placed between elements of higher conductance to reduce the flow of heat. Often used in aluminum windows.

Threshold. The member that lies at the bottom of a sliding glass door or swinging door; the sill of a doorway.

Tilt window. A single- or double-hung window whose operable sash can be tilted into the room for interior washability.

Transmittance. The percentage of radiation that can pass through glazing. Transmittance can be defined for different types of light or energy, e.g., visible light transmittance, UV transmittance, or total solar energy transmittance.

Transom window. The window sash located above a door. Also called transom light.

Triple glazing. Three panes of glass or plastic with two air spaces between.

U-factor (U-value). A measure of the rate of non-solar heat loss or gain through a material or assembly. It is expressed in units of Btu/hr-sq ft-°F (W/sq m-°C). Values are normally given for NFRC/ASHRAE winter conditions of 0° F (18° C) outdoor temperature, 70° F (21° C) indoor temperature, 15 mph wind, and no solar load. The U-factor may be expressed for the glass alone or the entire window, which includes the effect of the frame and the spacer materials. The lower the U-factor, the greater a window's resistance to heat flow and the better its insulating value.

Ultraviolet light (UV). The invisible rays of the spectrum that are outside of the visible spectrum at its short-wavelength violet end. Ultraviolet rays are found in everyday sunlight and can cause fading of paint finishes, carpets, and fabrics.

Vent. The movable framework or sash in a glazed window that is hinged or pivoted to swing open.

Vinyl-clad window. A window with exterior wood parts covered with extruded vinyl.

Visible light. The portion of the electromagnetic spectrum that produces light that can be seen. Wavelengths range from 380 to 720 nanometers.

Visible transmittance (VT). The percentage or fraction of the visible spectrum (380 to 720 nanometers) weighted by the sensitivity of the eye, that is transmitted through the glazing.

Warranty. Usually written guarantee of the integrity of a product and of the maker's responsibility for the repair or replacement of defective parts.

Warm-edge technology. The use of low-conductance spacers to reduce heat transfer near the edge of insulated glazing.

Weatherstripping. A strip of resilient material for covering the joint between the window sash and frame in order to reduce air leaks and prevent water from entering the structure.

Weep hole. A small opening in a wall or window sill member through which water may drain to the building exterior.

For A Free Estimate Call:
813 631-0097
Or E-mail:

West Coast Windows
8106 Temple Terrace Hwy.
Temple Terrace, FL 33637

Showroom Hours 8-4 Mon-Fri

Financing Available

visa/mastercard/amex

Phone (813) 631-0097
Fax (813) 631-1426

website design by:
Tampa Web Design